Gamesa Electric

  1. Home
  2. Products
  3. Drives, converters and industrial motors
 

Variable Speed Drives and converters; industrial motors

Frequency variators (drives) are power electronic solutions for controlling a variable-speed motor that runs on an alternating current (AC); the drives are fed from an AC source.



Gamesa Electric boasts a wide selection of frequency variators and power converters designed for various uses, available in both low and medium voltage (up to 3.3 kV). The solutions for a higher voltage level are custom developed according to the specifications of the customer.



Gamesa Electric drives can control both squirrel cage asynchronous motors and synchronous motors, with wound rotors and permanent magnets. 



These products incorporate cutting edge advances for wind generators, as well as for marine propulsion motors, achieving a very precise control of velocity by means of a high quality current controlled on both the motor side and the grid side. Furthermore, Gamesa Electric's electric converters include the latest technology in the development of two level and multilevel systems. 



Gamesa Electric's portfolio of converters includes doubly-fed and full conversion machines.



The converters can be unidirectional (from the grid to the load or from the generator to the grid), or bidirectional with active front (AFE, Active Front End) which isolates the facility's different mechanical components from possible distortions in the grid. This guarantees total control over the motor and generator, ensuring compliance with the requirements of the grid connection. 



Gamesa Electric's converters use the modularity concept, which ensures flexibility whilst adapting to any power and a high system availability, allowing them to operate continually at a reduced power if a fault occurs in any of the modules. As such, their design means that they obtain the maximum power density using, for example, latest generation IGBTs and liquid cooling

Additionaly to power converter and drives, Gamesa Electric offers a complete range of motors for industrial applications, custom-designed for each client, with the following characteristics:

  • Power of up to 40 MW
  • Voltage of up to 15 kV
  • Low and high-speed
  • Horizontal or vertical
  • All types of cooling available (air, water, etc.)
  • Global VPI insulation
  • Sized for use with frequency converters
  • Complete system of tests and validations
  • Ingress protection from IP23 up to IP68
The technologies available, all of which have been tried and tested in our factory, are the following:
  • Asynchronous machines
  • Wound rotor asynchronous machines
  • Synchronous machines
  • Permanent magnet synchronous machines

Our motors have been installed in the following applications:

  • Compressors
  • Pumps
  • Cement mills
  • Blowers
  • Winding machines
  • Presses
  • Extruders
  • Rolling mills
  • Turbo-compressors